Cable Pulling Grip for Secure Wire and Cable Installation
Cable Pulling Grip provides a secure way to pull cable through conduit, tray, and duct routes. The woven mesh body tightens under tension and helps crews guide cable with better control during installation and maintenance work.
As a professional manufacturer of Cable Pulling Grip, we provide more cost-effective products. Whether you want to buy or become a distributor, you are welcome to contact us anytime.
Cable Pulling Grip
Cable Pulling Grip helps installers pull cable with better control in conduit, duct, tray, and general routing work. The woven mesh body expands over the cable and then tightens as tension increases. This simple holding action gives crews a more direct pulling connection without adding a bulky clamp. Because the grip follows the cable shape, it can move through many installation paths more smoothly. For contractors, utilities, and distributors, Cable Pulling Grip is a practical product for daily cable handling and installation jobs.
Designed for steady cable movement
A good pulling tool must hold the cable firmly while keeping the pulling path clean. Cable Pulling Grip does that by spreading force over the surface of the cable instead of locking at only one small point. That helps reduce slip during longer pulls and gives the crew better control at the front end of the run. The eye section connects easily to pulling rope, leader line, or other pulling hardware. This supports faster setup and a more organized workflow on site.
Easy to use in different installation routes
Installers often work in spaces that include bends, entry points, trays, sleeves, and narrow openings. The mesh body can flex with the cable and adapt to different routing conditions. That flexibility helps when cable needs to pass through straight runs and controlled curves. The product also makes handling easier during setup, repositioning, and recovery. When a team wants one simple tool for many pulling tasks, Cable Pulling Grip fits the job well and keeps operation direct.
Suitable for power, telecom, and industrial work
Cable projects vary from building wiring to outdoor service routes and equipment upgrades. This product can support cable installation in power distribution, telecom deployment, utility maintenance, factory wiring, and general construction work. Distributors also like this type of product because it serves many customer groups without complicated explanation. Cable Pulling Grip can be used where crews want stable pulling support, clean cable entry, and dependable handling during routine installation or maintenance work.
Practical for sales and distribution
For a product page, buyers usually want clear function, simple structure, and broad application value. This item meets that need. It is easy to understand, easy to present, and easy to match with related installation accessories. The design supports smooth cable movement, which makes it suitable for standard supply, project orders, and OEM discussions. Many buyers search for Cable Pulling Grip when they want a straightforward tool for pulling and guiding cable.
Ready for catalog use
This product page can serve companies that sell installation tools, pulling accessories, or wire mesh handling products. The wording stays broad enough for different cable types, but the use case remains clear. Buyers can quickly see that the product supports safer and more efficient cable handling. That makes the page easier to understand and easier to promote. Cable Pulling Grip is a practical addition to a professional cable installation catalog.
Split Lace, Single Eye
| Part Number | Cable Diameter | Bale Length | Mesh Length | Approx Break Strength |
| MHG075-L | 0.75-0.99”(19.1-25.1mm) | 10”(254.0mm) | 26”(660.4mm) | 2700 lbs. |
| MHG100-L | 1.00-1.24”(25.4-31.5mm) | 10”(254.0mm) | 29”(736.6mm) | 4720 lbs. |
| MHG125-L | 1.25-1.49”(31.8-37.8mm) | 10”(254.0mm) | 31”(787.4mm) | 4720 lbs. |
| MHG150-L | 1.50-1.99”(38.1-50.5mm) | 10”(254.0mm) | 35”(889.0mm) | 4720 lbs. |
Split Lace, Double Eye
| Part Number | Cable Diameter | Bale Length | Mesh Length | Approx Break Strength |
| DMHG075-L | 0.75-0.99”(19.1-25.1mm) | 10”(254.0mm) | 26”(660.4mm) | 2700 lbs. |
| DMHG100-L | 1.00-1.24”(25.4-31.5mm) | 10”(254.0mm) | 29”(736.6mm) | 4720 lbs. |
| DMHG125-L | 1.25-1.49”(31.8-37.8mm) | 10”(254.0mm) | 31”(787.4mm) | 4720 lbs. |
| DMHG150-L | 1.50-1.99”(38.1-50.5mm) | 10”(254.0mm) | 35”(889.0mm) | 4720 lbs. |
| DMHG200-L | 2.00-2.49”(50.8-63.2mm) | 10”(254.0mm) | 37”(989.8mm) | 10080 lbs. |
| DMHG250-L | 2.50-2.99”(63.5-75.9mm) | 10”(254.0mm) | 39”(990.6mm) | 10080 lbs. |
| DMHG300-L | 3.00-3.49”(76.2-88.6mm) | 10”(254.0mm) | 41”(1041.4mm) | 10080 lbs. |
| DMHG350-L | 3.50-3.99”(88.9-101.3mm) | 10”(254.0mm) | 45”(1143.0mm) | 13120 lbs. |
| DMHG400-L | 4.00-4.49”(101.6-114.0mm) | 10”(254.0mm) | 47”(1193.8mm) | 13120 lbs. |
WebLink:
Internallinking:
Shop
